A partial or full factory reset can be performed. To perform a complete factory reset, use a thin pin (Not Included) to toggle the reset button located at StellarMate Pro communication side



The following are the steps required to perform a factory reset:

  1. Use a pin to press the reset button while the unit is off.
  2. Power on the unit.
  3. Wait until you start hearing a repeating slow beep.
  4. Release the pin
  5. Select the Factory Reset mode:
    1. Partial Recovery: Restore operating system, but keep settings and photos. Use the pin to toggle the reset button momentarily.
    2. Full Recovery: Restore operating system and settings. All settings and captured photos are reset to default. Use the pin to press and hold for at least 3 seconds then release.
  6. A fast beep indicates restoration is in progress. Wait until the recovery process is complete. It can take anywhere from 3 to 5 minutes to complete. Afterwards, the unit will automatically reboot.