Maximum acceptable difference between requested and measured temperature set point. When the temperature threshold is below this value, the temperature set point request is deemed successful.
Wait this many seconds after guiding is resumed to stabilize the guiding performance before capture.
Cover or uncover telescope dialog timeout in seconds
When starting to process a sequence list, reset all capture counts to zero. Scheduler overrides this option when Remember job progress is enabled.
Reset mount model after meridian flip
Use flip command if it is supported by the mount.
Display received FITS in the Summary screen preview window.
Set HFR Threshold percentage gain. When an autofocus operation is completed, the autofocus HFR value is increased by this threshold percentage value and stored within the capture module. If In- Sequence-Focus is engaged, the autofocus module only performs auto-focusing procedure if current HFR value exceeds the capture module HFR threshold. Increase value to permit more relaxed changes in HFR values without requiring a full autofocus run.
Run In-Sequence HFR check after this many frames.
Calculate median focus value after each autofocus operation is complete. If the autofocus results become progressively worse with time, the median value shall reflect this trend and prevent unnecessary autofocus operations when the seeing conditions deteriorate.
In-sequence HFR threshold value controls when the autofocus process is started. If the measured HFR value exceeds the HFR threshold, autofocus process is initiated. If the HFR threshold value is zero initially (default), then the autofocus process best HFR value is used to set the new HFR threshold, after applying the HFR threshold modifier percentage. This new HFR threshold is then used for subsequent In-Sequence focus checks. If this option is enabled, the HFR threshold value is constant and gets saved to the sequence file.
