Features
Astrolink4 INDI driver supports AstroLink 4 mini device. AstroLink 4.0 mini device was designed to make astroimaging easier. Contains two focuser controllers, regulated outputs for heaters, peltiers or fans, switchable power outputs, different s ...
Read More...
Features
The Astromechanics Light Pollution Meter is a handheld / PC based monitoring tool to measure sky brightness in mag/arcsec2. Measurements are compatible with Unihedrons Sky Quality Meter (SQM). It features :
Measure sky brightness in mag/arcs ...
Read More...
Features
A GPS device is also required. Many devices are support, please check the hardware compatiblity page before purchasing a GPS device and make sure the GPS device is supported under Linux. The U-Plox AG GPS available from Odroid is one example of ...
Read More...
Installation
DragonLIGHT is included with libindi.
Features
The DragonLIGHT is a DC powered flat panel controller to illuminate any 12V light source.
Configuration
As a network device, you will need to connect the DragonLIGHT to your network. Just co ...
Read More...
Features
The INDI GPIO driver uses the libgpiod library to access the system's GPIO interface. It only supports ports labeled as GPIO by the kernel. Both inputs and outputs are On/Off switches. The status of output switches cannot be determined, so ...
Read More...
Features
Tip: StellarMate users can simply follow the GPS video tutorial.
A GPS device is also required. Many devices are support, please check the hardware compatiblity page before purchasing a GPS device and make sure the GPS device is supported under ...
Read More...
Features
INDI GPS NMEA driver is designed to parse GPS NMEA streams to provide location and time updates. Usually, the driver is running on a device like Raspberry PI while the GPS NMEA server is running on a remote device like a phone that resides on th ...
Read More...
Features
Provides basic auto guiding interface.
Operation
Usually the user doesn't control this device directly, but instead uses a client software (such as Ekos) to perform autoguiding and sends pulse commands to the mount using GPUSB.
Read More...
