Features
The driver can control the dome's relative and absolute position and calibrate the dome until it reports a valid azimuth position. The user can setup home and park positions in addition to dome slaving parameters. Furthermore, the user can set u ...
Read More...
Features
DDW is a fully automatic observatory dome control system. Link your dome to a computer for complete automation including telescope slaving and shutter control. It supports the following features:
Slave dome rotation to your telescope
Rotatio ...
Read More...
Features
The driver can completely control the Dragonfly’s relays and Sensors for customizing your observatory needs for remote control. The relays can be used for many things such as switching control voltages to open or close the roof, switching lights ...
Read More...
DragonLAIR is included with libindi:
Features
The DragonLAIR is a DC powered roll off roof controller, capable of moving full buildings 6,500lbs (3,000kg) and more. It has a built in web server, redundant networking, 4 safety sensors, and 2 limit switch ...
Read More...
This package provides the INDI driver for Lunatico NexDome Beaver controller.
NexDome is a classic observatory dome with more than 100 degrees of shutter opening, allowing you to point your telescope to the zenith while remaining shielded from stray ligh ...
Read More...
Features
This device is a generic dome controller. Commercial "Sirius Domes" uses this device. MaxDome II is a fully automatic observatory dome control system. Link your dome to a computer for complete automation including telescope slaving and shutter ...
Read More...
Features
NexDome is a fully automatic observatory dome control system. Link your dome to a computer for complete automation including telescope slaving and shutter control. It supports the following features:
Slave dome rotation to your telescope
Ro ...
Read More...
Observatory Control System (OCS)
The OCS is an open-source (hardware and software) Observatory control that is very flexible and customizable.https://onstep.groups.io/g/onstep-ocs/wiki for full info.
Features
The following features of OCS are supported ...
Read More...
Pulsar Observatories domes utilize rigel controller for rotation and optionally shutter control.
Features
The dome controller is powered via the supplied 240V/12V DC transformer or a 7AH lead-acid battery. Power to the unit is controlled via the m ...
Read More...
ScopeDome controller can be used with a classic observatory dome and also roll-off roof, but the driver has only been tested with a dome so far.
Features
ScopeDome is a fully automatic observatory dome control system. It also has a variety of sensors an ...
Read More...
Features
Talon6 is a roll off roof control system for observatories automation. It has been used by several observatiories like e.g. E-eye in Spain that hosts more than 55 observatories with Talon6 Roll Off Roof solutions.
INDI driver has been tes ...
Read More...
Features
With the release of INDI v2.0.9, a new INDI Universal Roll-Off Roof (ROR) driver was introduced. Up to this point, there was no standanrd implementation for a simple ROR in INDI. Depending on you control your roof, you had to write your own INDI ...
Read More...
