Features
This driver supports the 10 Micron HPS and QCI models. All basic LX200 functions as well as some 10 Micron extensions are supported like goto, park, pier side, ultra precision and pressure and temperature for the refraction model and satellite ...
Read More...
The Telescope-Control-System TCS of ALLUNA Optics has been designed for the remote control of high-quality telescopes. Alluna Optics provides only ASCOM drivers and a Windows EXE program to control the TCS2 Device. The TCS2 can also be controlled by an op ...
Read More...
Features
The INDI AOK Skywalker driver interacts with the AOK Skywalker mount controller (DDM Skywalker) using the TCP/IP protocol over WiFi or a wired ethernet link.
The Herkules line of the AOK Skywalker mounts are produced by AOKSwiss & Magnetdr ...
Read More...
Features
There are no extra features for this driver.
Operation
It only works with firmware versions 1.19 and higher, because needs to support ACK command. However version 1.25 is recommended because there are some bugs in LX200 protocol in previous ve ...
Read More...
Features
This INDI Astrotrac driver interacts with Astrotrac mounts via WiFi. It fully supports all the mount features and provides support for a mount model powered by INDI Alignment Subsystem. This results in highly accurate GOTOs when used with a plat ...
Read More...
Installation
The INDI Avalon StarGO driver is released as a 3rd party driver and requires INDI Library >= v1.7.5. To install the driver under Ubuntu:
sudo apt-add-repository ppa:mutlaqja/ppa
sudo apt-get update && sudo apt-get install indi- ...
Read More...
Features
This INDI paramount driver interacts with Paramount mounts via TheSkyX TCP Server either locally on the same computer or across a network connection. Bisque does not permit a direct control of the mount and so TheSkyX must be started and configu ...
Read More...
Features
Beta Note
This driver operates the following mounts:
Losmandy G11
Explore Scientific EXOS2
Explore Scientific iEXOS100
Be sure the correct mount type is selected when using the driver for the first time. The driver defauls to EXOS2.
R ...
Read More...
Features
The LX200 Basic supports most functions of the HEQ-5 MCU Update:
Project Website
Project Support and Community
Operation
It works with all firmware versions
Read More...
This driver is connected to INDI Library through USB, RS-232, Bluetooth or WiFi.
The Crux TitanTCS driver is released as part of the INDI Library.
The minimum firmware requirement to use with INDI Library is version 3.2.0 or higher.
The ...
Read More...
Features
The LX200 Basic supports basic functions of the LFE Photo:
Project Website
Project Support and Community
Operation
It works with all firmware versions
Read More...
Features
The LX200 Basic supports basic functions of the LittleFoot Vpower:
Project Website
Project Support and Community
Operation
It works with all firmware versions.
Read More...
Features
This driver control Losmany Gemini/Gemini2 mounts either via USB connection or Network.
Current features are:
Goto/Slew
Cold/Warm startup
Sidereal, lunar, solar and king track rates
Configurable custom parking positions
Pulse-guiding
ST ...
Read More...
Features
The OpenAstroTech driver extends the LX200 GPS that was previously used driver and adds some extra features:
Focusing with relative (instead of time based) movements and backlash compensation.
Support for the Auto Polar Alignment extension. ...
Read More...
