Mounts: All Listings 

Read More...

Read More...

  Features The driver supports the Gemini Pulsar 2 and the Pulsar controllers. Basic functions such as Track, Sync, and Park/Unpark are supported as well as enabling/disabling of periodic error correction, pole crossing and refraction correction. T ...
Read More...

Read More...

Read More...

Read More...

Features This driver is no longer needed when using SkySafari 7 or later. Connect to INDI server directly and do not add this driver to your equipment profile. Only use this driver when using SkySafari 6 or earilar SkySafari is an astronomy application ...
Read More...

Features This driver supports the SkySensor2000PC telescope contoller using the LX200 compatible protocol. The driver is similar to the LX200 driver but the features that are not supported by the SkySensor2000PC have been removed. There are no extra feat ...
Read More...

Read More...

Read More...

Read More...

  Features The driver supports Takahashi Temma mounts. Basic functions such as Track, Sync, and Park are supported. Select Temma Takahasi from your client. For example, if using Ekos, you can select the driver from telescope dropdown in the Profile ...
Read More...

Features The INDI TeenAstro driver interacts with a mount controller using the LX200 protocol through a serial link. The TeenAstro mount controller can be used with many different mounts that use stepper motors, including SkyWatcher, Astro-Physics and ...
Read More...

Read More...

Features The lx200gps supports many extended features over the conventional Autostar based telescope. The lx200gps driver specfically supports: GPS Power Control. GPS Status (Sleep, Wakeup, Restart). GPS System Update. Syncing client with GPS time ...
Read More...

Features Do not use this driver with LX200 Classic telescope as it uses a seperate driver. Even though you can use this driver to control LX200 GPS or LX200 16" telescopes, you won't be able to use the extra features provided by these devices Operation ...
Read More...

Features TODO Operation TODO
Read More...

Features The lx200classic supports functions that were removed with the introduction of Autostar: Ability to read object name from controller. Setting Max Slew Rate. Setting Maximum and Minimum Slew Limtits. Support for all library commands (lookup ...
Read More...

INDI Celestron AUX Driver is released with INDI Library >= v1.9.4 BETA driver. Do not use unattended. For Alt-Az mode, you must adjust the PID parameters to achieve good tracking. This driver was not fully tested with an Equatorial mount. Use caution. ...
Read More...

  Features The Celestron Nextstar supports all GOTO and sky alignment functions of NexStar Evolution telescopes. In principle it should support any Celestron scope using AUX command set (most of them) with SkyFi wireless module. It was never tested ...
Read More...