List Categories and Listings by C
INDI Celestron AUX Driver is released with INDI Library >= v1.9.4
BETA driver. Do not use unattended. For Alt-Az mode, you must adjust the PID parameters to achieve good tracking. This driver was not fully tested with an Equatorial mount. Use caution. ...
Read More...
Included with libindi v1.6+.
Features
This driver supports Celestron telescopes using the NexStar protocol. The following models use this protocol:
NexStar GPS
NexStar GPS-SA
NexStar iSeries
NexStar SE Series
NexStar GT
Advanced GT
CGE mo ...
Read More...
Features
The Celestron Nextstar supports all GOTO and sky alignment functions of NexStar Evolution telescopes. In principle it should support any Celestron scope using AUX command set (most of them) with SkyFi wireless module. It was never tested ...
Read More...
Features
The Nightscape driver should support all features of the Alta and Aspen cameras including
USB connection
Temperature setpoint
Hardware binning (vertical only. horizontal binning is implemented in software)
Frame sub-selection
Shutter capt ...
Read More...
Features
Celestron SCT Focuser driver is used to control Celestron Motorized Focuser when connected directly to a computer via USB. This driver should not be used if the focuser is connected directly to the mount. When connected directly to the mount, ...
Read More...
INDI iOptron CEM120 Driver is released as a 3rd party driver and requires INDI Library >= v1.6.5.
Features
This INDI driver is not limited to CEM120 as it supports the following iOptron mounts:
CEM120-EC2 with firmware 20171001 and later
CEM120- ...
Read More...
