Features
The I-Nova driver support all of I-Nova CCDs. Subframing and binning is supported in software. Both gray scale and color modes are supported.
Operation
Once you're connected, you can capture images as FITS from the camera, or use video streami ...
Read More...
Features
The driver supports the following iEQ mounts:
CEM60 (Firmware 140807 and later)CEM60-EC (Firmware 140807 and later)iEQ45 Pro (Firmware 140807 and later)iEQ45 Pro AA (Firmware 140807 and later)
Functions such as Track, Sync, Guiding, Ho ...
Read More...
INDI can control Imaging Source DMK CCDs via the Video4Linux driver. This includes support for long exposures in addition to video streaming. DMK CCDs are supported in INDI library v0.9.8 or later. Under Ubuntu, you can install the driver via:
Features ...
Read More...
Features
There are no extra features for this driver
Operation
The lx200classic and lx200autostar drivers are used for telescope control as well as focus control. You can have a fine control of the focuser by setting the following parameters in the dri ...
Read More...
Features
The JMI SmartFocus focuser control unit allows remote operation of JMI focusers. You can control the focuser absolute and relative positions and motions can be interrupted.
The figure below shows the Main Control panel of the SmartFocus driver ...
Read More...
INDI (v >= 0.9.7) supports game pads under Linux for input control. The INDI joystick driver (indi_joystick) queries the controller and provide the following properties:
Joysticks: Each joystick displays a normalized magnitude [0 to 1] and an angle. ...
Read More...
Features
The LACERTA Motorfocus is a precision stepper motor with handbox and temperature sensor. It can be used in standalone or remotely. It features :
GOTO function (absolute position) and relative position
Automated temperature compensation
Bac ...
Read More...
Features
This is the INDI driver for the Lacerta MGEN autoguider. The camera must be powered and connected before you run the INDI driver.
Read More...
Features
The LX200 Basic supports basic functions of the LFE Photo:
Project Website
Project Support and Community
Operation
It works with all firmware versions
Read More...
Features
The LX200 Basic supports basic functions of the LittleFoot Vpower:
Project Website
Project Support and Community
Operation
It works with all firmware versions.
Read More...
Features
This driver control Losmany Gemini/Gemini2 mounts either via USB connection or Network.
Current features are:
Goto/Slew
Cold/Warm startup
Sidereal, lunar, solar and king track rates
Configurable custom parking positions
Pulse-guiding
ST ...
Read More...
This package provides the INDI driver for Lunatico NexDome Beaver controller.
NexDome is a classic observatory dome with more than 100 degrees of shutter opening, allowing you to point your telescope to the zenith while remaining shielded from stray ligh ...
Read More...