Directory: A-Z
INDI AZ-GTi Driver based on EQMod driver and is released as a 3rd party driver and requires INDI Library >= v1.7.5.
Features
This INDI driver interacts with a mount controller using the Skywatcher Protocol through WiFi
Goto/Slew at m ...
Read More...
Installation
INDI EQMod Driver is released as a 3rd party driver and requires INDI Library >= v0.9.7.
Features
This INDI driver interacts with a mount controller using the Skywatcher Protocol through a serial link. It can directly drive Skywatcher ...
Read More...
Features
Beta Note
This driver operates the following mounts:
Losmandy G11
Explore Scientific EXOS2
Explore Scientific iEXOS100
Be sure the correct mount type is selected when using the driver for the first time. The driver defauls to EXOS2.
R ...
Read More...
Features
INDI FLI driver should be able to support all FLI family of CCDs. This includes temperature control, subframing..etc. The PDF driver is an absolute focuser driver that can be used in autofocusing applications.
Operation
Once you're connected, ...
Read More...
Features
INDI FLI driver should be able to support all FLI family of CCDs. This includes temperature control, subframing..etc. The PDF driver is an absolute focuser driver that can be used in autofocusing applications.
Operation
Once you're con ...
Read More...
Features
The FocusLynx/Focus Boss II hub allows precise remote operation of the motorized focuser. Different type of motor could be controlled by this hub.
Optec TCF-Lynx focusers are Absolute focusers that will automatically home upon power-up. Th ...
Read More...
Features
Gemini SnapCap is used for dust protection and also to provide a source for evenly illuminated flat light source. INDI SnapCap driver controls parking and unparking of the cap, in addition to controlling the flat light source which are prim ...
Read More...
Features
The driver supports the following Gotonova 8400 based controllers
Functions such as Track, Sync (Regular and CMR), and Park are supported.
Operation
On connection, the mount retrieves the controller time and location and updates the c ...
Read More...
Features
The INDI GPIO driver uses the libgpiod library to access the system's GPIO interface. It only supports ports labeled as GPIO by the kernel. Both inputs and outputs are On/Off switches. The status of output switches cannot be determined, so ...
Read More...
Features
Tip: StellarMate users can simply follow the GPS video tutorial.
A GPS device is also required. Many devices are support, please check the hardware compatiblity page before purchasing a GPS device and make sure the GPS device is supported under ...
Read More...
Features
INDI GPS NMEA driver is designed to parse GPS NMEA streams to provide location and time updates. Usually, the driver is running on a device like Raspberry PI while the GPS NMEA server is running on a remote device like a phone that resides on th ...
Read More...
Features
Provides basic auto guiding interface.
Operation
Usually the user doesn't control this device directly, but instead uses a client software (such as Ekos) to perform autoguiding and sends pulse commands to the mount using GPUSB.
Read More...
Features
The Integra 85 is a focusing rotator. It has a clear aperture of 85 mm, a backfocus of 69 mm, and a travel of 10 mm. The focusing function of the Integra85 is based on 3 fine pitch leadscrews running in special low friction nuts that provide hi ...
Read More...
Features
The LX200 Basic supports most functions of the HEQ-5 MCU Update:
Project Website
Project Support and Community
Operation
It works with all firmware versions
Read More...
This driver is connected to INDI Library through USB, RS-232, Bluetooth or WiFi.
The Crux TitanTCS driver is released as part of the INDI Library.
The minimum firmware requirement to use with INDI Library is version 3.2.0 or higher.
The ...
Read More...
